Manual

Page 5
Door open time (seconds)
1. Take the 'door open time' card from the starter pack.
2. Present the card to the reader. The reader will start beeping.
3. Wait for the required period you wish the door to remain open.
4. Present the card again at the end of the period to set the open time. The beeping will stop.
1 2 3 4
BEEP!
BEEP!
FUNCTION CARD
door open time card
The period that the door is unlocked for when a
valid token is presented is set as follows:
1. Present this card
2. Wait for the required period
3. Present this card again, the beeping will stop
FUNCTION CARD
door open time card
The period that the door is unlocked for when a
valid token is presented is set as follows:
1. Present this card
2. Wait for the required period
3. Present this card again, the beeping will stop
FUNCTION CARD
door open time card
The period that the door is unlocked for when a
valid token is presented is set as follows:
1. Present this card
2. Wait for the required period
3. Present this card again, the beeping will stop
Silent operation
1. Take the silent operation function card from the starter pack.
2. Present the card to the reader. The reader will beep.
3. The reader is now in silent operation mode.
4. Present the card again to disable silent operation mode. The reader will beep twice.
The external handle is only engaged once access has been granted. The inside handle is always engaged.
A valid user card will cause the Green LED to ash briey and the handle will then engage. This time
period can be changed with the 'door open time' card but should be kept to a minimum to preserve
battery life.
Normal Operation
Alarm Sounder
The alarm is activated when the door fails to re-lock itself. The alarm will sound for 60 seconds during
which time the unit will try to lock the door once every 10 seconds. After 60 seconds the unit will then
shut down. When the unit is woken up, it will immediately try to lock the door. If it fails, the alarm cycle
will start again. Failure to relock will substantially reduce battery life.
1 2 3 4
BEEP!
BEEP!
BEEP!
FUNCTION CARD
silent operation
Present this card to silence the beeping noises
made by the reader. Present this card again to
re-enable the beeping noises
FUNCTION CARD
silent operation
Present this card to silence the beeping noises
made by the reader. Present this card again to
re-enable the beeping noises
FUNCTION CARD
silent operation
Present this card to silence the beeping noises
made by the reader. Present this card again to
re-enable the beeping noises
Red ash
Amber constant ashing
A valid user card has been presented and the handle is engaged
An invalid user card has been presented - No access granted
LED indications
Green ash
Then unit is conguring - Please wait.