Manual

Page 7
The declaration of conformity is available on request. Contact details are provided at: http://paxton.info/596
1
10,000
1
100
1 sec
60 sec
1 3
0 °C 55 °C
50 mm 30 mm
60 mm 194 mm
30 mm
150 mm 194 mm
72 mm
Specications
Min
Max
Min
Max
Environment
Dimensions
Features
Waterproof
Width
Height
Depth
Door open time
Number of Card Packs
Silent operation
Number of Users
Access levels (Colour Zones)
Operating temperature - Battery limits
Yes
No
Battery Type
Typical Battery Life
30,000 operations
Paxton Battery Pack
Full System Reset
1. Remove the unit from the door by removing the 4 mounting screws on the rear lock assembly.
2. Remove the access plate at the rear of the front lock assembly. (top two standoff screws)
3. Locate the reset push button at the lower right corner of the circuit board.
4. Hold the button down and wake up the unit by briey depressing the handle. The unit will beep 3 times.
5. Press and release the button 4 more times - The unit will beep 5 times and display a ashing GREEN LED.
6. Remove and replace the battery plug. - The unit will beep and display a ashing AMBER LED.
- IT NOW REQUIRES RE-ENROLLING.
7. Replace the access plate.
8. Ret the lock to the door with the 4 mounting screws.
- OR -
1. Present Enrolment card.
2. Present Door open time card twice.
3. Present Enrolment card.
4. Present Door open time card twice.
5. WAIT FOR 5 SECONDS!
The unit is returned to its Factory settings
and will require initialising again.
Read Range
Keyfob
Token
Low
Vandal resistance
Reader/Keypad module (required space on door)
Total outside dimensions (includes handle clearance)