Owner's manual

ManualsBrandsPaxton ManualsFor HomeHands free demonstration unit

Page 1

04/02/2010

Ins-30142 Hands free demonstration unit

What’s in the box?

Technical Support

Technical help is available: Monday - Friday from 07:00 - 19:00 (GMT)

Saturday from 09:00 - 13:00 (GMT)

01273 811011 support@paxton.co.uk

Documentation on all Paxton products can be found on our website - http://www.paxton.co.uk/

Net2 demonstration cards and keyfobs

Hands free demonstration unit

Figure 8 IEC power lead.

Documentation

Paxton

Hands free keycard

Summary of content (5 pages)

PAGE 1
04/02/2010 Paxton Ins-30142 Hands free demonstration unit Technical Support 01273 811011 support@paxton.co.uk Technical help is available: Monday - Friday from 07:00 - 19:00 (GMT) Saturday from 09:00 - 13:00 (GMT) Documentation on all Paxton products can be found on our website - http://www.paxton.co.uk/ What’s in the box? Hands free demonstration unit Figure 8 IEC power lead.
PAGE 2
Operation QThe system comprises of a standard P50 proximity reader and a hands free interface. 1. Power up. QPower up the unit and the reader LED’s will cycle through while the unit configures itself. QAll 3 LED’s will now be lit. QThis unit has been loaded with modified software to demonstrate the wireless range and flexibility of Q the Net2Air Hands free system. The reader will respond to a token with a beep and a flashing Green Q LED as soon as a valid read is achieved. 2. Presenting passive tokens.
PAGE 3
AN1082 - Hands free - How does it work? Paxton Access The hands free system increases the effective read range of a standard Paxton P or KP series reader to a maximum of 2.5 metres. The system comprises of a hands free interface, a compatible reader (see read range table) and hands free tokens (keycard or keyfob). The system operates by using the field being transmitted by the P series reader. This wakes up the token which then communicates with the interface.
PAGE 4
Reader Position The read range of the system depends on the type of reader chosen. Read Range P38 0.85 m P50 1.1 m P75 1.5 m P200 2.5 m P200 metal mount 2.0 m Long Range Reader 5.0 m When a reader is connected to a hands free interface board for the first time the reader firmware will be modified to enable the reader to transmit the address of its interface every 100ms. The location of both reader and the interface directly affects the operation of the system.
PAGE 5
Keycard Operation The keycard will operate as a passive (short range), hands free (same as the keyfob) or longrange hands free token. Before the keycard buttons will operate, the card needs to know the unique address of the interface(s) it will be working with and its button setting. This is done by first using the keycard in HANDS FREE mode on each reader/interface that is required to be used in longrange mode. The keycard stores this address and button information for future use.