Manual

Ins-30149 PROXIMITY Mullion reader

25/10/2010

Technical Support

Technical help is available: Monday - Friday from 07:00 - 19:00 (GMT)

Saturday from 09:00 - 13:00 (GMT)

01273 811011

support@paxton.co.uk

Fitting

Documentation on all Paxton products can be found on our website - http://www.paxton.co.uk/

Paxton

Readers mounted together

between

readers

300 mm

Mounted on metal surface

Suitability

Security-sensitive doors

Wet environments

PAGE 1
25/10/2010 Paxton Ins-30149 PROXIMITY Mullion reader Technical Support 01273 811011 Technical help is available: support@paxton.co.uk Monday - Friday from 07:00 - 19:00 (GMT) Saturday from 09:00 - 13:00 (GMT) Documentation on all Paxton products can be found on our website - http://www.paxton.co.
PAGE 2
Wiring Connection to a control unit reader port WHITE labelled control units provide 5V at the Red terminal. The Red power wire for the reader should therefore be directly connected to the 12V supply terminal. Cable extensions Readers can be extended using Belden CR9540 10-core overall screened cable to a maximum of 100 metres.
PAGE 3
Technical Help Here is the list of topics about this product that receive the most technical support enquiries. We list them here to help you speed up the installation and trouble shooting process. 1 - Readers/Keypads not working. Q- Software settings - Confirm that the settings of the reader or keypad are correct. Q- Connections - Check the wiring and integrity of the connectors. If possible, test this reader on the other port. Q- Extended cable - Belden 9540 should be used up to a maximum of 100 m.