Instruction Manual

ManualsBrandsPaxton ManualsFor HomeTOUCHLOCK K series compact keypad

14/09/2011

Ins-30013 TOUCHLOCK K series compact keypad

Fitting

Keypad bezels

Additional bezels are available in black, white, grey, blue and silver. Registered installers can order these free

of charge by logging onto the secure installer extranet: http://paxton.info/1035 or if you are not a registered

installer please call us on: 01273 811011 for more information.

The declaration of conformity is available on request. Contact details are provided at: http://paxton.info/596

Technical Support

Technical help is available: Monday - Friday from 07:00 - 19:00 (GMT)

Saturday from 09:00 - 13:00 (GMT)

01273 811011

support@paxton.co.uk

Documentation on all Paxton products can be found on our website - http://www.paxton.co.uk/

Paxton

Summary of content (4 pages)

PAGE 1
4/09/2011 Paxton Ins-30013 TOUCHLOCK K series compact keypad Technical Support 01273 811011 Technical help is available: support@paxton.co.uk Monday - Friday from 07:00 - 19:00 (GMT) Saturday from 09:00 - 13:00 (GMT) Documentation on all Paxton products can be found on our website - http://www.paxton.co.uk/ Fitting Keypad bezels Additional bezels are available in black, white, grey, blue and silver.
PAGE 2
Bell Wiring 0V +12V Exit 12V DC power supply 0V +12V 0V Exit button (push to make) +12V Electric release 0V 12V DC release current rating must be less than 1A. K75 Screw connector option Wire outputs +12V DC 0V 1 2 3 4 5 6 7 8 9 0 # * Lock 12V Lock 0V Exit input  Exit 0V Bell 12V Bell 0V The unit should be mounted in conjunction with an electrical backbox to achieve the required clearance for the connector.
PAGE 3
Initialising a new system The first time the system is powered up the control unit will beep 3 times a second. Choose a 6 digit Programming Code and load this into the unit as follows: DO NOT USE 123456 - The default User Code (1234) will open the door before the Programming Code had been fully entered. 6 digit Programming Code 6 digit Programming Code The default user code is now set to 1234 You can now set up the user codes and features using the programming chart.
PAGE 4
Technical Help Here is the list of topics about this product that receive the most technical support enquiries. We list them here to help you speed up the installation and trouble shooting process. 1 - Can I use a fail open release (e.g. Maglock)? QThe lock wires from a compact keypad provide 12V DC to the electric lock. By default, the compact is set to operate with a fail Qlocked release - providing 12V on the lock wires when a valid entry is made.