Installation Manual

8 Microfence Installation Manual
Figure 6 - Drilling Template (full scale)
Power
The beacon has 2 power options:
1. a 5V power adapter
2. AAA batteries
Either the power adapter or AAA batteries must be installed for
the unit to operate.
The beacon contains an internal coin cell battery to maintain
client-specific configuration information. This coin cell should
never be removed.
Never remove the coin cell!
NOTE: The unit has been pre-programmed to operate on your
client code. Removal of the coin cell will cause the unit to lose
this programming: If this occurs, please contact Paycom
Hardware Support and a Technician can ship you a replacement
unit.
!
85 mm
(3.3 in)
8 mm dia.
(0.4 in)
40 mm
(1.6 in)
4 mm dia.
(0.2 in)