Datasheet

20 VEROTECHNOLOGIES sales: [phone]  [e-mail]  www.verotl.com
TECHNOLOGIES
vero
sales: [phone]  [e-mail]  www.verotl.com VEROTECHNOLOGIES 21
TECHNOLOGIES
vero
Verowire
The Verowire wiring system is ideal for prototypes, breadboards and limited
production runs. Finished results are of a high standard with a neat orderly ap-
pearance achieved in signicantly less time than more conventional methods.
Features
 Low prole
 High speed applications
 Suitable for high-density wiring
 No headers required
 Low cost
Wire specication
Diameter of wire: 0,20 mm (34 AWG)
Insulation: Self-uxing polyurethane*
Insulation Thickness: 0,005 mm
Proof Voltage: 600V d.c.
Current Rating: 0,100 A
Resistance @ 20
o
C: 0,857Ω/m
Length of wire/spool: 40 m
Colours: Pink or Gold
Verowire Ordering information
Description Unit of Sale
Order code
Wiring pen 1
79-1732
Spools wire; 2 gold, 2 pink 4
79-19038
Spool wire, Pink 4
79-1737
Spool wire, Gold 4
79-1739
Wiring combs 100
79-1735
Half pin 1000
18-0223
VEROWIRE and Prototyping Board Accessories
Verowire pen
Comb
Spool Wire
18-0223K
Pin insertion tool
and pins
18-3994L
W A R N I N G !
When soldering through polyurethane enamelled wire a small
quantity of TDI gas is produced. Use in a well ventilated room.
Verowire Accessories
Card support – ejector mechanism
Supplied as an accessory for any extender board, this device attaches to the end
and guides/supports the circuit board under test. Supplied as a kit comprising 2
support – ejector assemblies, 4 M3 x 8 long screws and 4 M3 nuts.
Card support – Ejector mechanism Ordering information
Description
Order code
Card support – ejector
22-2427
Card Support – Ejector Mechanism
Spot face cutter
Used to break copper tracks on a PCB.
Can be used by hand or, with the handle removed, tted into a bench drill
Spot Face Cutter Ordering information
Description
Order code
Spot Face Cutter
22-0239
Spot Face Cutter