Maintenance Guide

Cobham Wireless
idDAS Installation and Maintenance Guide 00109GU Rev. 2.0
Page | 94
5.7.2.2 Configuring the idRU External Alarms 1,2
The idRU PS NFPA External Alarms 1/2 are configured via the web management application. This is done as
part of the commissioning procedure detailed in the idDAS Web Management Guide or at any other time.
For convenience and quick reference, a brief description is provided below.
To configure the idRU External Alarm 1 and External alarm 2
1. Log into the relevant idRU and click the External Alarms hover-menu option.
2. If relevant, configure the External Alarms 1 and External Alarms 2 as follows:
x Set the Trigger to High or Low as required.
x You may optionally assign the alarm a recognizable description.
x Click Apply.
NOTE: Do NOT modify the definitions for External Alarm 3 (General alarm) and for External Alarm 4
(fan-hood). These alarms do NOT require configuration.
Figure 5-38. Configuring idRU External Alarms
Configurable
Do NOT modify!