Maintenance Guide

Cobham Wireless
idDAS Installation and Maintenance Guide 00109GU Rev. 2.0
Page | 129
6.9.6.4 Restoring a Configuration
Any configuration file listed in the Backup and Restore tab can be restored to the APOI. In order to restore a
configuration file that was saved to a different location on your computer or the network, it must first be
uploaded to the APOI and displayed in the list.
To restore previous configuration
1. In the left pane, click the Cluster item and then click the Backup/Restore tab.
2. Verify the desired configuration file is displayed in the list. If the file is saved in a different location, click
the Upload button, browse for the file and upload to the APOI, verifying that it is displayed in the list.
3. Select the required configuration file from the available list in the Backup/Restore tab, by enabling the
adjacent button.
4. Click the Restore button to start the restore process, follow and respond appropriately to any prompts.
Figure 6-40. Restore Band Configuration
5. Click on the Control and Params tab and verify that the required configuration settings are displayed.
1. Select
configuration file
(radio button)
2. Click Restore.