Maintenance Guide

Cobham Wireless
idDAS Installation and Maintenance Guide 00109GU Rev. 2.0
Page | 65
5.2 PS NFPA idRUs Installation Instructions
For Public Safety NFPAs NEMA 4 ready idRUs:
x Use tubing meeting the specifications detailed in Section 3.2.1, for all connected CPRI and ETH idRU
connections. Unused Ethernet and CPRI ports are plugged as described in Section 5.6.5.
x idDAS public repeaters support a Binder-type external alarms connecter and additional alarms as
described in Section 5.7.2.
5.3 Unpacking and Package Contents
This section lists the package contents for two type of idRU installations:
x idRUs with standard brackets (without fan hood)
x idRUs with fan-hood brackets
Unpacking 5.3.1
Upon receiving the idRU Repeater perform the following:
1. Examine the shipping container for damage before unpacking the unit.
2. Perform a visual inspection to reveal any physical damage to the equipment.
3. Verify that all of the equipment (listed below) is included. Otherwise contact Cobham Wireless service
representative.
Accessories for idRUs with Standard Brackets 5.3.2
ITEM
X1 Flash Drive with documentation and driver for USB cable A to B (cable is not supplied)
x2 RJ45 LSZH cable, CAT6,1 Gbit, 3 m, 180 degrees
For AC models – one or more of the AC cables may be provided, according to your region:
x UK AC external cable assembly with Binder connector
x EU AC external cable assembly with Binder connector
x US AC external cable assembly with Binder connector
For DC models:
x idRU 30 — U.S. DC external cable assembly with 7-Pole Binder connector (P/N DC00219)
x idRU 40 — DC external cable assembly with 4-Pole Binder connector (P/N 40WVC7900)
x2 Brackets — support both wallmount and rack mount options
x4 M8x16 Screws, hex head, stainless steel
x1 Drill Template — u
sed for marking wall mount drilling holes
x4 3/8” Jumbo Anchor Bolts, zinc plated — used for wallmount installations
x2 Plugs and O-rings — for
plugging up to two unused Ethernet and AUX fibre ports:
x Plug — threaded blanking plug, M32x1.5 mm, nickel plated, IP68
x O-ring — M32x2 mm, NBR, black