Maintenance Guide

Cobham Wireless
idDAS Installation and Maintenance Guide 00109GU Rev. 2.0
Page | 74
5.5 Mounting the Repeaters
This section describes how to mount the repeaters in a rack and on a wall.
IMPORTANT!
x
The weight of the unit requires that two people mount the unit onto the rack.
x
The repeaters must always be installed vertically with the connectors on the underside for protection.
Horizontal installation on a bench for long time may cause damage to the signal booster due to over-
heating.
Rack Mount Procedure 5.5.1
To mount the repeaters in a rack
Below are two views of a rack installation that includes the following elements:
x A remote without a fan hood;
x A remote with a fan hood
x A combiner filter (required for some installations)
NOTE: The Filter/Combiner is installed with the components
facing inwards.
Figure 5-13. View-
a of Rack Installation
Figure 5-14. View-b of (same) Rack Installation
Repeater with
fan hood
Repeater without
fan hood
Rear View
of Filter
Combiner