User's Manual

9-April-2022 1/2
© 2022 Williams-Sonoma, Inc. A
Williams-Sonoma Inc.
Assembly Instructions
Pottery Barn – Pottery Barn Teen – Pottery Barn Kids – Williams Sonoma Home – West Elm – Rejuvenation – Mark and Graham
Wireless Sports Headphone
User Manual
Please read this manual carefully before operating the device and save it for further reference.
Included
1.Headphone 2.USB charging cable 3.Audio cable 4. Manual
Button Function:
Indicator Light Function:
Charging Function:
1.It contains a built-in rechargeable battery. Before the first use, please fully charge the headphone to ensure optimal performance and battery life.
2.Connect the charging cable to any powered USB port. Make sure it is fully plugged in.
NOTE: Operating the headphone while charging may affect the battery life.
Bluetooth Pairing:
1.Turn on the Bluetooth function on the device that you wish to pair (i.e. smartphone or other compatible device). Some devices may require
selecting “Search for Devices” or “Add New Device” in order to create a Bluetooth pairing. If so, initiate a manual search.
2.Select “PBK Headphones” once it appears on your device screen. Once a connection is established and the pairing is complete, the indicator
light will turn blue.
* The headphone must be paired with a Bluetooth output device before it can operate.
* It is advised to turn the volume on your device all the way down before connecting, then gradually increase the volume until a comfortable listening
Function
Operation
1.Power on/off
2.Play/Pause/Answer
call/hang up call.
Long press to turn the power on and off.
Quick press to Play/Pause.If there is an incoming call on the connected device, quick press to answer and
press again to hang up.
1.Volume
2.Last song/Next song
Long press to adjust volume.
Short press for last song or next song.
Mode
Short press for Bluetooth or Radio mode.
Charging port
Insert the micro USB end of the charging cable into this port and connect the USB end to power supply to
charge the battery.
Audio cable output port
Insert the audio cable into this port to play music through a non-Bluetooth device.
Indicator light
Blue or red light indicates operation status.(See “Indicator Light Function” below for more details.)
Mic
This is the sound receiver when answering a call.
SD card slot
Insert the SD card into the slot to play the downloaded music.
Function
Indicator light
Power on
Blue light
Power off
Red light flashes
Device has been turned on and is searching.
Blue and red light flashes alternately.
Connection Success
Blue light
Low battery
Red light flashes
Charge Mode
Red light turns on while charging, and off when charging is completed.