User`s guide

33
Chapter 3: BIOS Setup Utility
Resume by WOM/RING
An input signal on the serial Ring indicator (RI) line (in other words, and incoming
call on the modem)/LAN awakens the system from a soft off state.
Resume By USB (S3)
This item allows users to enable or disable the USB device Walk-up from S3
mode.
Resume By PS2 MS/KB (S3)
These items enable or disable you to allow mouse or keyboard activity to awaken
the system from power saving mode.
Power-On by Alarm
This item allows users to enable or disable the alarm to wake up the system. If set
to Enabled, users can specify the specific day of month and the exact time to
power up the system.
• Date of Month Alarm: Use this item to define the date of month when
using the RTC alarm to resume the system.
• Time (hh:mm:ss) Alarm: Use this item to define the time when using
the RTC alarm to resume the system.
Power On After Power Fail
This item enables your computer to automatically restart or return to its last
operating status.
Press <Esc> to return to the main menu setting page.