User`s guide

21
Chapter 3: BIOS Setup Utility
Halt On
This item defines the operation of the system POST (Power On Self Test) routine.
You can use this item to select which types of errors in the POST are sufficient to
halt the system.
Base Memory, Extended Memory, and Total Memory
These items are automatically detected by the system at start up time. These are
display-only fields. You cannot make changes to these fields.
Advanced BIOS Features Page
This page sets up more advanced information about your system. Handle this page
with caution. Any changes can affect the operation of your computer.
Video
This item defines the video mode of the system. The motherboard has a built-in
VGA graphics system; you must leave this item at the default value.
Press <Esc> to return to the main menu setting page.
: Move Enter: Select +/-/: Value F10: Save Esc: Exit F1: General Help
F5: Previous Values F6: Fial-Safe Defaults F7: Optimized Defaults
Phonex-AwardBIOS CMOS Setup Utility
Advanced BIOS Features
Item Help
f
X
X
CPU Feature [Press Enter]
Removable Device Priority [Press Enter]
Hard Disk Boot Priority [Press Enter]
Network Boot Priority [Press Enter]
CPU Internal Cache [Enabled]
External Cache [Enabled]
Quick Power On Self Test [Enabled]
First Boot Device [Removable]
Second Boot Device [Hard Disk]
Third Boot Device [CDROM]
Boot Other Device [Enabled]
Boot Up Floppy Seek [Disabled]
Boot Up NumLock Status [On]
Gate A20 Option [Fast]
Typematic Rate Setting [Disabled]
Typematic Rate (Chars/Sec) 6
Typematic Delay (Msec) 250
Security Option [Setup]
APIC Mode [Enabled]
f
f
Menu Level
f
f
f
f
Drive A
This item define the characteristics of any diskette drive attached to the system.
You can connect one or two diskette drives.