User`s guide

31
Chapter 3: BIOS Setup Utility
SuperIO Device (Press Enter)
X
Scroll to this item and press <Enter> to view the following screen:
Phonex-AwardBIOS CMOS Setup Utility
SuperIO Device
Item Help
Menu Level
f
Onboard FDC Controller [Enabled]
Onboard Serial Port 1 [3F8/IRQ4]
Onboard Parallel Port [378/IRQ7]
Parallel Port Mode [SPP]
ECP Mode Use DMA 3
: Move Enter: Select +/-/: Value F10: Save Esc: Exit F1: General Help
F5: Previous Values F6: Fial-Safe Defaults F7: Optimized Defaults
f
Onboard FDC Controller
This option enables the onboard floppy disk drive controller.
Onboard Serial Port 1
This option is used to assign the I/O address and interrupt request (IRQ) for
onboard serial port 1/2.
Press <Esc> to return to the main menu setting page.
X
Parallel Port Mode
Use this item to select the parallel port mode. You can select Normal (Standard
Parallel Port), ECP (Extended Capabilities Port), EPP (Enhanced Parallel Port), or
BPP (Bi-Directional Parallel Port).
Onboard Parallel Port
This item enables or disables the onboard parallel port, and assigns a port address.
The Auto setting will detect the available address.
• ECP Mode Use DMA (3): When the onboard parallel port is set to ECP
mode, the parallel port can use DMA3/1.