User`s guide

Motherboard User’s Guide

3 Use the arrow keys to select the RAID Config (see Figure 2.2), then press Enter.

The RAID Config window appears.

Figure 2.3 RAID Config Window

4 From the RAID Config window, globally enable RAID, then enable the SATA ports

with disks that you want to use for RAID.

If RAID is enabled globally but not enabled on the individual SATA port, disks on

that port can only be used for non-RAID applications.

In the example in Figure 2.3, three SATA ports are enabled, so the non-bootable

RAID array can include up to 3 SATA disks. If there is a disk Connected to "SATA

2 Secondary", it can not be used for RAID.

5 Press F10 to save the configuration and exit.

The PC reboots.

Installing the NVIDIA RAID Software Under Windows

This section describes how to run the setup application and install the RAID software.

1 Start the nForce Setup program to open the NVIDIA Windows nForce Drivers page.

Figure 2.4 nForce Driver Installation Window