User`s guide

Chapter 5: Setting Up NVIDIA RAID Configuration

Create an F6 install floppy by using the "-x" option, then copy all files in

"…\IDE\WinXP\sataraid" to a floppy disk. (For Windows 2000, substitute "Win2K"

in the path.)

2 After you complete the RAID BIOS setup, boot from the Windows CD.

Figure 2.13 Windows Setup—Specify Devices

Installing the RAID Drivers

Your system may come with a Windows install CD that already includes NVIDIA RAID

drivers. If so, then this section is not relevant.

If that is not the case (or you are trying to install a new version of Windows), then you will

need an NVIDIA RAID driver F6 install floppy. Check to see if one came with your system.

If not, you can create one by downloading the appropriate driver package and following the

steps in this section.

3 Press F6 and wait a few moments for the Windows Setup screen to appear.

The Windows Setup program starts.

a Insert the floppy that has the RAID driver, press S, then press Enter.

Figure 2.14 Windows Setup—Selected SCSI Adapter

4 Specify the NVIDIA drivers.

The following Windows Setup screen appears: