User`s guide

52
Motherboard User’s Guide
b Select “NVIDIA RAID CLASS DRIVER (required)” and then press Enter.
c Press S again at the Specify Devices screen, then press Enter.
d Select “NVIDIA NForce Storage Controller (required)” and then press Enter.
The following Windows Setup screen appears listing both drivers:.
Figure 2.15 Windows Setup—NVIDIA drives listed
5 Press Enter to continue with Windows XP Installation.
Be sure to leave the floppy disk inserted in the floppy drive until the blue screen
portion of Windows XP installation is completed, then take out the floppy.
6 Follow the instructions on how to install Windows XP.
After Windows XP is completely installed, it is recommended that you install the
ForceWare software in order to access the MediaShield RAID Management tool.
Note:
Each time you add a new hard drive to a RAID array, the RAID driver will have
to be installed under Windows once for that hard drive. After that, the driver
will not have to be installed.