User`s guide

Chapter 2: Motherboard Installation

Install The Motherboard

Install the motherboard in a system chassis (case). The board is a Micro ATX size

motherboard. You can install this motherboard in an ATX case. Make sure your

case has an I/O cover plate matching the ports on this motherboard.

Connect the power connector from the power supply to the PWR1 connector on

the motherboard. PWR2 is a +12V connecotr for CPU Vcore power.

If there is a cooling fan installed in the system chassis, connect the cable from the

cooling fan to the SYS_FAN1 fan power connector on the motherboard.

Connect the case switches and indicator LEDs to the PANEL1 header.

Pin Signal Pin Signal

1 HD_LED_P(+) 2 FP PWR/SLP(+)

3 HD_LED_N( - ) 4 FP PWR/SLP( - )

5 RES ET_ SW_N( - ) 6 POWER_ SW_P(+)

7 RES ET_ SW_P(+) 8 POWER_ SW_N( - )

9 RSV D_DNU 10 KEY

Install the motherboard in a case. Follow the case manufacturer’s instructions to

use the hardware and internal mounting points on the chassis.