User`s guide

Chapter 3: BIOS Setup Utility

Standard CMOS Setup

System Time 00:47:28

System Date Mon 05/12/2006

Primary IDE Master Hard Disk

Primary IDE Slave Not Detected

Secondary IDE Master Not Detected

Secondary IDE Slave Not Detected

Third IDE Master Not Detected

Third IDE Slave Not Detected

Fourth IDE Master Not Detected

Fourth IDE Slave Not Detected

Help Item

User [Enter], [TAB]

or [SHIFT-TAB] to

select a field.

Use [+] or [-] to

configure system Time.

System Date & System Time

These items set up system date and time.

PrimaryIDE Master/Primary Slave/Secondary Master/Secondary Slave/

Third IDE Master/Slave/Fourth IDE Master/Slave

Use these items to configure devices connected to the Primary/Secondary IDE

channels. To configure an IDE hard disk drive, choose Auto. If the Auto setting

fails to find a hard disk drive, set it to User, and then fill in the hard disk

characteristics (Size, Cyls, etc.) manually. If you have a CD-ROM drive, select

the setting CDROM. If you have an ATAPI device with removable media (e.g. a

ZIP drive or an LS-120), select Floptical.

Floppy A/B

These items set up size and capacity of the floppy diskette drive(s) installed in

the system.

Some options on the main menu page lead to tables of items with installed values

that you can use cursor arrow keys to highlight one item, and press PgUp and

PgDn keys to cycle through alternative values of that item. The other options on

the main menu page lead to dialog boxes requiring your answer OK or Cancel by

selecting the [OK] or [Cancel] key.

If you have already changed the setup utility, press F10 to save those changes

and exit the utility. Press F1 to display a screen describing all key functions.

Press F9 to load optimtimal settings.

Standard CMOS Setup Page

This page displays a table of items defining basic information of your system.

Floppy A 1.44 MB 3

Floppy B Disabled

: Move Enter: Select +/-/: Value F10: Save Esc: Exit

F1: General Help F9: Optimized Defaults