Datasheet

19
Chapter 3: BIOS Setup Utility
Date & Time
These items set up system date and time.
fIDE Master/Slave, SATA 1~4
Your computer has one IDE channel which can be installed with one or two devices
(Master and slave.) In addition, this motherboard supports four SATA channels
and each SATA allows one device to be installed. Use these items to configure each
device on the IDE channel.
IDE Bus Master
This item enables or disables the DMA under DOS mode. We recommend you to
leave this item at the default value.
Some options on the main menu page lead to tables of items with installed values
that you can use cursor arrow keys to highlight one item, and press PgUp and
PgDn keys to cycle through alternative values of that item. The other options on
the main menu page lead to dialog boxes requiring your answer OK or Cancel by
selecting the [OK] or [Cancel] key.
If you have already changed the setup utility, press F10 to save those changes
and exit the utility. Press F1 to display a screen describing all key functions.
Press F9 to load optimtimal settings.
Standard CMOS Setup Page
This page displays a table of items defining basic information of your system.
CMOS Setup Utility -- Copyright (C) 1985-2005, American Megatrends, Inc.
Standard CMOS Setup
Date
Mon 10/11/2010
f
IDE Master Not Detected
IDE Slave Not Detected
SATA1 ATAPI CDROM
SATA 2 Not Detected
SATA 3 Not Detected
SATA 4 Not Detected
IDE BusMaster Enabled
Help Item
f
f
f
Time 01:18:24
User [Enter], [TAB]
or [SHIFT-TAB] to
select a field.
Use [+] or [-] to
configure system Date.
f
f
mnlk
: Move
F10: Save ESC: Exit
Enter : Select
+/-/: Value
F9: Optimized Default
F1: General Help