Specifications

Onboard Parallel
Port
Use this item to enable or disable the onboard
LPT1 parallel port, and to assign a port
address. The Auto setting will detect and
available address.
Parallel Port Mode
Use this item to set the parallel port mode.
You can select SPP (Standard Parallel Port),
ECP (Extended Capabilities Port), EPP
(Enhanced Parallel Port), or ECP + EPP.
Parallel Port IRQ
Use this item to assign either IRQ 5 or 7 to
the parallel port.
Parallel Port DMA
Use this item to assign a DMA channel to the
parallel port. The options are 0, 1 and 3.
Onboard PCI IDE
Use this item to enable or disable either or
both of the onboard Primary and Secondary
IDE channels.
Onboard AC’97
Sound
This item enables or disables the onboard
audio chip.
Onboard AC’97
Modem
This item enables or disables the onboard
modem chip.
OnBoard LAN
This item enables or disables the onboard
network interface.
USB Function
Support
Enable this item if you plan to use the USB
ports on this mainboard.
USB Function for
DOS
Enable this item if you plan to use the USB
ports on this mainboard in a DOS
environment.
28