Specifications

Installing Memory Modules

This motherboard accommodates two 184-pin 2.5V unbuffered

Double Data Rate SDRAM (DDR SDRAM) Dual Inline Memory

Module (DIMM) sockets, and supports up to 2.0 GB of DDR400

SDRAM with KM400A NB or DDR333 SDRAM with KM400

NB.

Installation Procedure

These modules can be installed with up to 2 GB system memory.

Following these steps to install the memory module.

1. Push down the latches on both sides of the DIMM

socket.

2. Align the memory module with the socket. There is

a notch on the DIMM socket that you can install the

DIMM module in the correct direction. Match the

cutout on the DIMM module with the notch on the

DIMM socket.

3. Install the DIMM module into the socket and press

it firmly down until it is seated correctly. The

socket latches are levered upwards and latch on to

the edges of the DIMM.

4. Install any remaining DIMM modules.

DIM1

DIM