Specifications

13
Jumper JP3: CPU Clock Selector
This jumper selects the processor clock frequency.
CPU Clock Pins 1-2 Pins 3-4
133 MHz Off Off
166 MHz Off On
100 MHz On Off
200 MHz On On
Install the Motherboard
Install the motherboard in a system chassis (case). The board is a
FLEX ATX size motherboard. You can install this motherboard in
an ATX case. Ensure your case has an I/O cover plate that matches
the ports on this motherboard.
Install the motherboard in a case. Follow the instructions of the
case manufacturer to use the hardware and internal mounting
points on the chassis.
Connect the power connector from the power supply to the CN3
connector on the motherboard. J3 is the CPU Vcore power
connector.
If there is a cooling fan installed in the system chassis, connect the
cable from the cooling fan to the SYS_FAN1 fan power connector
on the motherboard.
Connect the case switches and indicator LEDs to the PANEL1
connector.
CN3
J3
1
PANEL1
SYS_ FAN1
1