Specifications

19
PC
I
2 PC1
Expansion Slots
This motherboard has one AGP, one CNR and two 32-bit PCI
slots.
Follow the steps below to install an AGP/CNR/PCI expansion
card.
1. Locate the AGP, PCI or CNR slot on the motherboard.
2. Remove the slot cover from the system chassis.
3. Insert the expansion card edge connector into the slot and press
it firmly down until fully inserted.
4. Secure the expansion card bracket in the system chassis with a
screw.
PCI (Peripheral Components Interconnect) Slots
You can install the 32-bit PCI interface expansion cards in the
slots.
AGP (Accelerated Graphics Port) Slot
You can install a graphics adapter supporting 8X AGP
specification in the AGP slot. This slot has one 8X AGP edge
connector.
CNR (Communications Networking Riser) Slot
The CNR (Communications Networking Riser) slot is an industry
standard slot that allows for the installation of a special audio/
modem riser card. Different territories have different regulations
regarding the specifications of a modem card. You can purchase an
CNR1
A
GP1
PCI1