User`s guide

26
Motherboard User’s Guide
Standard CMOS Setup Page
This page displays a table of items defining basic information
about your system.
Date & Time
These items set up system date and time.
Primary IDE Master/Primary IDE Slave/Secondary IDE
Master/Secondary IDE Slave
Use these items to configure devices connected to the Primary
and Secondary IDE channels. To configure an IDE hard disk
drive, choose Auto. If the Auto setting fails to find a hard disk
drive, set it to User, and then fill in the hard disk characteristics
(Size, Cyls, etc.) manually. If you have a CD-ROM drive, select
the setting CDROM. If you have an ATAPI device with remov-
able media (e.g. a ZIP drive or an LS-120), select Floptical.
Floppy A/B
These items set up size and capacity of the floppy diskette
drive(s) installed in the system.
CMOS SETUP UTILITY – Copyright (C) 1985-2003, American Megatrends, Inc.
Standard CMOS Setup
System Time 00:00:10
System Date Fri 10/24/2003
Primary IDE Master Auto
Primary IDE Slave Auto
Secondary IDE Master Auto
Secondary IDE Slave Auto
Floppy A 1.44 MB 3 1/2”
Floppy B Disabled
Help Item
User [Enter], [TAB] or
[SHIFT-TAB] to select a
field.
Use [+] or [-] to configure
system time.