User`s guide

29
Chapter 3: BIOS Setup Utility
DRAM Voltage Control
Use this item to adjust the voltage of the DRAM memory.
CPU Vcore Voltage Adjustment
Use this item to adjust the Vcore voltage of the CPU.
Max CUPID Value Limit
When this item is enabled, you can use Prescott CPU and LGA-
775 CPU and there will be a normal NT4.0 installation; otherwise,
the automatically restarting will occur while installing.
Features Setup Page
This page sets up some parameters for peripheral devices con-
nected to the system.
OnBoard Floppy Controller
Use this item to enable or disable the onboard floppy disk drive
interface.
OnBoard Serial Port
Use this item to enable or disable the onboard COM1 serial port,
and to assign a port address.
CMOS SETUP UTILITY – Copyright (C) 1985-2003, American Megatrends, Inc.
Features Setup
Help Item
Allows BIOS to
Enable or Disable
Floppy Controller.
OnBoard Floppy Controller Enabled
Serial Port1 Address 3F8/IRQ4
Onboard IR Port Disabled
Parallel Port Address 378
Parallel Port Mode ECP
ECP Mode DMA Channel DMA3
Parallel Port IRQ IRQ7
OnBoard PCI IDE Controller Both
Audio Device Enabled
MODEM Device Auto
Ethernet Device Enabled
Onboard USB Function Enabled
USB Function For DOS Disabled