User`s guide

22
Motherboard User’s Guide
Follow the steps below to install an AGPro/CNR/PCI expansion
card.
1. Locate the AGPro, CNR or PCI slot on the motherboard.
2. Remove the blanking plate of the slot from the system
chassis.
3. Install the edge connector of the expansion card into the
slot. Ensure the edge connector is correctly seated in the
slot.
4. Secure the metal bracket of the card to the system
chassis with a screw.
AGPro Slot (AGP1)
The AGPro slot is used to install AGP graphics card that emulates
the AGP function. In order to get better performance and compat-
ibility on our special design AGPro slot, we recommend you should
use one of the AGP graphics cards that have been tested by our
company. Please refer to the “VGA Card Support List for AGPro
Slot”on page 23.