User`s guide

Motherboard User’s Guide

Keyboard Power On

If you enable this item, system can automatically resume by

pressing any keys or power key on the keyboard, or typing in the

password. You must use an ATX power supply in order to use this

feature.

Primary Graphics Adapter

You can use this item to select AGPro, OnChip VGA or PCI as

the primary graphics adapter.

Allocate IRQ to PCI VGA

If this item is enabled, an IRQ will be assigned to the PCI VGA

graphics system. You set this value to No to free up an IRQ.

PCI IDE BusMaster

This item enables or disables the DMA under DOS mode. We

recommend you to leave this item at the default value.

PCI / Plug and Play Setup Page

This page sets up some parameters for devices installed on the

PCI bus and those utilizing the system plug and play capability.

PCI / Plug and Play Setup

Primary Graphics Adapter AGPro

Allocate IRQ to PCI VGA Yes

PCI IDE BusMaster Disabled

Help Item

Select which

graphics controller

to use as the

primary boot device.

: Move Enter: Select +/-/: Value F10: Save Esc: Exit

F1: General Help F9: Optimized Defaults