User`s guide

Motherboard User’s Guide

Connect the power connector from the power supply to the ATX1 connector on

the motherboard. The ATX12V is a +12V connector for CPU Vcore power.

If there is a cooling fan installed in the system chassis, connect the cable from the

cooling fan to the SYS_FAN fan power connector on the motherboard.

Connect the CPU fan connector to CPU_FAN.

Connect the case switches and indicator LEDs to the PANEL1 header. Please refer

to the following list of the PANEL1 pin assignments.

Install the Motherboard

Install the motherboard in a system chassis (case). The board is a Micro ATX size

motherboard. You can install this motherboard in an ATX case. Make sure your

case has an I/O cover plate matching the ports on this motherboard.

Install the motherboard in a case. Follow the case manufacturer’s instructions to

use the hardware and internal mounting points on the chassis.

Pin Signal Pin Signal

1 HD_LED_P( +) 2 FP PWR/SLP( +)

3 HD_LED_N( - ) 4 FP PWR/SLP( - )

5 RESET_SW_ N( - ) 6 POWER_SW_ P( +)

7 RESET_SW_ P( +) 8 POWER_ SW _ N( - )

9 RSV D_DNU 10 KEY

ATX1

ATX12V

PANEL1

SYS_FAN