User`s guide

21
Chapter 2: Motherboard Installation
Follow the steps below to install a CNR1/AGP1/PCI expansion card.
1 Locate the CNR1, AGP1 and PCI slots on the motherboard.
2 Remove the blanking plate of the slot from the system chassis.
3 Install the edge connector of the expansion card into the slot. Ensure
the edge connector is correctly seated in the slot.
4 Secure the metal bracket of the card to the system chassis with a
screw.
AGP1 Slot (AGP 8X)
The AGP1 slot is used to install AGP graphics card that emulates the AGP func-
tion. In order to get better performance and compatibility on our special design
AGP1 slot, we recommend you should use one of the AGP graphics cards that have
been tested by our company.