User`s guide

28
Motherboard User’s Guide
Drive A (1.44M, 3.5 in./None)
This item defines the characteristics of any diskette drive attached to the system.
Floppy 3 Mode Support (Disabled)
Floppy 3 mode refers to a 3.5-inch diskette with a capacity of 1.2 MB. Floppy 3
mode is sometimes used in Japan.
Base Memory, Extended Memory, and Total Memory
These items are automatically detected by the system at start up time. These are
display-only fields. You cannot make changes to these fields.
Halt On (All Errors)
This item defines the operation of the system POST (Power On Self Test) routine.
You can use this item to select which types of errors in the POST are sufficient to
halt the system.
Video (EGA/VGA)
This item defines the video mode of the system. This motherboard has a built-in
VGA graphics system; you must leave this item at the default value.
Press <Esc> to return to the AwardBIOS CMOS Setup Utility page.
Advanced BIOS FeaturesAdvanced BIOS Features
Advanced BIOS FeaturesAdvanced BIOS Features
Advanced BIOS Features
This option defines advanced information about your system.
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Phoenix-AwardBIOS CMOS Setup Utility
Advanced BIOS Features
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help

X
X
CPU Feature [Press Enter]
Hard Disk Boot Priority [Press Enter]
CPU L3 Cache [Enabled]
Hyper-Threading Technology [Enabled]
Quick Power On Self Test [Enabled]
First Boot Device [Floppy]
Second Boot Device [Hard Disk]
Third Boot Device [CDROM]
Boot Other Device [Enabled]
Boot Up Floppy Seek [Disabled]
Boot Up NumLock Status [On]
Gate A20 Option [Fast]
Typematic Rate Setting [Disabled]
Typematic Rate (Chars/Sec ) 6
Typematic Delay (Msec) 250
Security Option [Setup]
APIC Mode [Enabled]
OS Select For DRAM > 64MB [Non-OS2]
HDD S.M.A.R.T. Capability [Disabled]
Report No FDD For WIN 95 [Yes]
Delay For HDD (Secs) [ 4 ]
Small Logo (EPA) Show [Disabled]


Item Help
Menu Level


