User`s guide

32
Motherboard User’s Guide
Report No FDD For WIN 95 (Yes)
This item determines whether the BIOS will report no FDD for Windows 95 OS.
Delay for HDD (Secs) (4)
Users may set a delay from 1 to 15 seconds in the cold boot process. Some hard
disk drives need extra time to spin up in order to identify correctly. If the system
does not start after the memory test, try to add tomes in this field.
Small Logo (EPA) Show (Disabled)
Enables or disables the display of the EPA logo during boot.
Press <Esc> to return to the AwardBIOS CMOS Setup Utility page.
Advanced Chipset FeaturesAdvanced Chipset Features
Advanced Chipset FeaturesAdvanced Chipset Features
Advanced Chipset Features
These items define critical timing parameters of the motherboard. You should leave
the items on this page at their default values unless you are very familiar with the
technical specifications of your system hardware. If you change the values incor-
rectly, you may introduce fatal errors or recurring instability into your system.
Phoenix-AwardBIOS CMOS Setup Utility
Advanced Chipset Features
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help

F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
DRAM Timing Selectable [By SPD]
CAS Latency Time [2]
Active to Precharge Delay [8]
DRAM RAS# to CAS# Delay [4]
DRAM RAS# Precharge [4]
Memory Frequency For [Auto]
System BIOS Cacheable [Disabled]
Video BIOS Cacheable [Enabled]
AGP Aperature Size (MB) [128]
Init Display First [PCI Slot]
** Photon Acceleration Technology **
Fast Chip Select [Auto]
CPC Addr/Control [Auto]
Turbo Mode [Auto]
** On-Chip VGA Setting **
On-Chip Frame Buffer Size [8MB]
Boot Display [Auto]
Item
Help
Menu Level

DRAM Timing Selectable (By SPD)
Enables you to select the CAS latency time in HCLKs of 2, 2.5, or 3. The value
is set at the factory depending on the DRAM installed. Do not change the
values in this field unless you change specifications of the installed DRAM or
the installed CPU.