User`s guide

34
Motherboard User’s Guide
Boot Display (Auto)
This item allows you to set the boot display function to be “Auto”, “CRT”,
“EFP”, “TV”, “CRT+EFP”, or “CRT+TV”.
Press <Esc> to return to the AwardBIOS CMOS Setup Utility page.
Integrated PeripheralsIntegrated Peripherals
Integrated PeripheralsIntegrated Peripherals
Integrated Peripherals
These options display items that define the operation of peripheral components on
the system’s input/output ports.
OnChip IDE Device [Press Enter]
Onboard Device [Press Enter]
SuperIO Device [Press Enter]



Phoenix-AwardBIOS CMOS Setup Utility
Integrated Peripherals
Item Help
Menu Level
 OnChip IDE Device
Scroll to this item and press <Enter> to view the following screen:
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help

F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Phoenix-AwardBIOS CMOS Setup Utility
OnChip IDE Device
Item Help
Menu Level

IDE HDD Block Mode [Enabled]
On-chip Primary PCI IDE [Enabled]
IDE Primary Master PIO [Auto]
IDE Primary Slave PIO [Auto]
IDE Primary Master UDMA [Auto]
IDE Primary Slave UDMA [Auto]
On-chip Secondary PCI IDE [Enabled]
IDE Secondary Master PIO [Auto]
IDE Secondary Slave PIO [Auto]
IDE Secondary Master UDMA [Auto]
IDE Secondary Slave UDMA [Auto]
ATA 66/100 Cable Msg [Enabled]
*** On-Chip Serial ATA Setting***
SATA Mode [IDE]
On-chip Serial ATA [Disabled]
Serial ATA Port0 Mode [Primary Master]
Serial ATA Port1 Mode Primary Master
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help

F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults

If your IDE hard drive
supports block mode
select. Enabled for
automatic detection of
block read/writes per
sector the drive can
support.