User`s guide

Motherboard User’s Guide

PASSWORD DISABLED

If you have selected “System” in “Security Option” of “BIOS Features Setup”

menu, you will be prompted for the password every time the system reboots or

any time you try to enter BIOS Setup.

If you have selected “Setup” at “Security Option” from “BIOS Features Setup”

menu, you will be prompted for the password only when you enter BIOS Setup.

Supervisor Password has higher priority than User Password. You can use Super-

visor Password when booting the system or entering BIOS Setup to modify all

settings. Also you can use User Password when booting the system or entering

BIOS Setup but can not modify any setting if Supervisor Password is enabled.

Exit Without SavingExit Without Saving

Exit Without Saving

Highlight this item and press <Enter> to discard any changes that you have made in

the Setup Utility and exit the Setup Utility. When the Exit Without Saving dialog

box appears, press <Y> to discard changes and exit, or press <N> to return to the

main menu.

If you have made settings that you do not want to save, use the “Exit

Without Saving” item and press <Y> to discard any changes you have

made.

This concludes Chapter 3. Refer to the next chapter for information on the

software supplied with the motherboard.

Save & Exit SetupSave & Exit Setup

Save & Exit Setup

Highlight this item and press <Enter> to save the changes that you have made in the

Setup Utility and exit the Setup Utility. When the Save and Exit dialog box appears,

press <Y> to save and exit, or press <N> to return to the main menu: