User`s guide

Motherboard User’s Guide

CPU Frequency Setting (200 MHz)

This item allows you to set CPU frequency.

DRAM Frequency (Auto)

This item shows the frequency of the DRAM in your computer.

Auto Detect DIMM/PCI Clk (Enabled)

When this item is enabled, BIOS will disable the clock signal of free DIMM/PCI slots.

Spread Spectrum (Disabled)

If you enable spread spectrum, it can significantly reduce the EMI (Electro-Magnetic

Interference) generated by the system.

Ratio Actual Value

These items show the locked ratio status and the actual ratio of the CPU installed in

your system.

Supervisor Password

This page helps you install or change a password.

Load Optimal Defaults

This option opens a dialog box that lets you install optimized defaults for all appropri-

ate items in the Setup Utility. Press <Y> and then <Enter> to install the defaults. Press

<N> and then <Enter> to not install the defaults. The optimized defaults place de-

mands on the system that may be greater than the performance level of the compo-

nents, such as the CPU and the memory. You can cause fatal errors or instability if you

install the optimized defaults when your hardware does not support them. If you only

want to install setup defaults for a specific option, select and display that option, and

then press <F7>.

Supervisor Password

Install or Change the

password.

Help item

Security Settings

Supervisor Password : Not Installed

Change Supervisor Password Press Enter

mnlk

: Move Enter : Select

+/-/: Value

F9: Optimized Defaults ESC: Exit

F1: General Help

F10: Save and Exit

Press <Esc> to return to the main menu setting page.