User`s guide

26
Motherboard User’s Guide
DRAM Frequency
This item shows the frequency of the DRAM in your system.
CPU Over-clocking Func.
This item decides the CPU over-clocking function installed in your system. If
the over-clocking fails, please turn off the system power. And then, hold the
PageUp key (similar to the Clear CMOS function) and turn on the power, the
BIOS will recover the safe default.
CPU Frequency
This item shows the frequency of the CPU installed in your system.
Hardware Monitor Page
This page sets up some parameters for the hardware monitoring function of this
motherboard.
CMOS SETUP UTILITY – Copyright (C) 1985-2003, American Megatrends, Inc.
Hardware Monitor Setup
Help Item
***System Hardware Monitor***
Vcore 1.504 V
Vdimm 2.496 V
Vivdd 2.608 V
Vcc5V 5.107 V
SB3V 3.296 V
CPU FAN Speed 4560 RPM
SYSTEM FAN Speed 0 RPM
CPU Temperature 41
o
C/105
o
F
SYSTEM Temperature 32
o
C/89
o
F
Smart FAN Temp. Limit of Full Disabled
CPU/System Temperature
These items display CPU and system temperature measurement.
FANs & Voltage Measurements
These items indicate cooling fan speeds in RPM and the various system voltage
measurements.
Load Optimal Defaults
This option opens a dialog box to ask if you are sure to install optimized
defaults or not. You select [OK], and then press <Enter>, the Setup Utility loads
all default values; or select [Cancel], and then press <Enter>, the Setup Utility
does not load default values.