User`s guide

Chapter 2: Motherboard Installation

Install the Motherboard

Install the motherboard in a system chassis (case). The board is a Micro ATX

size motherboard. You can install this motherboard in an ATX case. Make sure

your case has an I/O cover plate matching the ports on this motherboard.

Install the motherboard in a case. Follow the case manufacturer’s instructions to

use the hardware and internal mounting points on the chassis.

Connect the power connector from the power supply to the ATX1 connector on

the motherboard. The PJ1 is a +12V connector for CPU Vcore power.

If there is a cooling fan installed in the system chassis, connect the cable from the

cooling fan to the SYS_FAN fan power connector on the motherboard.

Connect the case switches and indicator LEDs to the PANEL1 header.

Pin Signal Pin Signal

1 HD_LED_P(+) 2 FP PWR/SLP(+)

3 HD_LED_N(- ) 4 FP PWR/SLP(-)

5 RESET_SW_ N( - ) 6 POWER_ SW_ P( +)

7 RESET_SW_ P( +) 8 POWER_ SW_N( - )

9 RSVD_DNU 10 KEY

ATX1

PJ1

PANEL1

SYS_FAN