User`s guide

22
Motherboard User’s Guide
Advanced Setup Page
This page sets up more advanced information about your system. Handle this page
with caution. Any changes can affect the operation of your computer.
TM Status
This item displays CPU Thermal Monitor status.
Max CPUID Value Limit
This item can support Prescott CPUs for old OS. Users please note that under NT
4.0, it must be set “Enabled”, while under WinXP, it must be set “Disabled”.
CMOS Setup Utility – Copyright (C) 1985-2005, American Megatrends, Inc.
Advanced Setup
Help Item
For the processorits
CPUID belows 0F41h.
TM2 only can be enable
under below setting.
1.Freq.>=3.6GHz FSB800
2.Freq.>=2.8GHz FSB533
Thermal Management
TM Status
Max CPUID Value Limit
Enhanced Halt (C1E)
Intel XD Bit
Intel EIST
Intel Virtualization Technol
Quick Power on Self Test
Boot up NumLock Status
APIC Mode
1st Boot Device
2nd Boot Device
3rd Boot Device
Hard Disk Drives
Removable Drives
CD/DVD Drives
Boot Other Device
TM1/TM2
Enabled
Disabled
Enabled
Enabled
Enabled
On
Enabled
ST3320620AS
BENQ DVD DC DW1810
1st FLOPPY DRIVE
Press Enter
Press Enter
Press Enter
Yes
Disabled
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help F9: Load Default Settings
Enabled
Thermal Management
Ehanced Halt (C1E)
This item enables or disables enhanced halt (C1E).
Intel XD Bit
Intel EIST
This item displays CPU’s temperature and enables you to set a safe temperature
to
prescott CPU.
This item allows users to enable or disable the Intel XD bit.
This item allows users to enable or disable the EIST (Enhanced Intel SpeedStep
technology).
Intel Virtulization Technol
When enabled, a VMM can utilize the additional hardware capabilities provided by
Vandor Pool Technology.
Quick Power On Self Test
Enable this item to shorten the power on self testing (POST) and have your system
start up faster. You might like to enable this item after you
are confinced that your
system hardware is operating smoothly.