User`s guide

Chapter 3: BIOS Setup Utility

1st/2nd/3rd Boot Device

Use these items to determine the device order the computer uses to look for an

operating system to load at start-up time.

Boot Up NumLock Status

This item determines if the NumLock key is active or inactive at system start-up

time.

APIC Mode

This item allows you to enable or disable the APIC (Advanced Programmable

Interrupt Controller) mode. APIC provides symmetric multi-processing (SMP)

for systems, allowing support for up to 60 processors.

Hard Disk Drives (Press Enter)

Scroll to this item and press <Enter> to view the following screen:

Specifies the boot

sequence from the

available devices.

Hard Disk Drives

: Move Enter: Select +/-/: Value F10: Save Esc: Exit

F1: General Help F9: Load Default Settings

Hard Disk Drives

1st Drive

Help Item

ST3320620AS

Press <Esc> to return to Advanced Setup screen.

Removable Drives (Press Enter)