User`s guide

2
Motherboard User’s Guide
Audio
Serial ATA
Four Serial ATA Connectors
Transfer rate exceeding best ATA (3.0 Gb/s) with scalability to higher rates
Low pin count for both host and devices
Onboard IDE channels
One IDE Connector
Supports PIO (Programmable Input/Output) and DMA (Direct Memory
Access) modes
Supports IDE Ultra DMA bus mastering with transfer rates of 100/66
MB/sec
Expansion Slots
Two 32-bit PCI slots
One PCI Expressx16 slot
One PCI Expressx1 slot
Memory Support
Two 240-pin DIMM sockets for DDR2 SDRAM memory modules
Supports DDR2 800/667 with dual-channel architecture
Maximum installed memory is 4 GB
System Memory Controller Support: DDR2 SDRAM with up to maxi-
mum memory of 4 GB.
PCI Express Graphics Interface Support: One PCI Express x16 slot
PCI Bus Interface Support: PCI Revision 2.3 Specification at 33MHz
Integrade Serial ATA Host Controller: Independent DMA operation with
Data transfer rates up to 3.0 Gb/s
Intgrated IDE Controller: Ultra DMA-100/66 Bus Master EIDE Control-
ler
USB 2.0: Integrated USB 2.0 interface
Hyper-Threading Technology
There are G31 Northbridge and ICH7 in the chipsets in accordance with an inno-
vative and scalable architecture with proven reliability and performance.
Chipset
5.1 Channel High Definition Audio Codec
Exceeds Microsoft Windows Logo Program (WLP) Requirements
ADCs support 44.1K/48K/96K/192KHz sample rate
• Power Support: Digital: 3.3V; Analog: 5.0V