User`s guide

7
Chapter 2: Motherboard Installation
I/O Ports
The illustration below shows a side view of the built-in I/O ports on the
motherboard.
PS/2 Mous e Use the upper PS/2 port to connect a PS/2 pointing
device.
PS/2 Keyboard Use the low er PS/2 port to connect a PS/2
keyboard.
COM1 Use the COM port to connect serial devices such
as mice or fax/modems. COM1 is identified by the
s y s t em as COM1.
VGA Port Use the VGA port to connect VGA devices.
LAN Port (optional) Connect an RJ-45 jack to the LAN port to connect
your computer to the Netw ork.
USB Por ts Use the USB ports to connect USB devices.
Audio Ports Use these three audio jacks to connect audio
devices. The first jack is for stereo Line-In signal,
the second jack for stereo Line-Out signal, and the
third jack for Microphone.