User`s guide

24
Motherboard User’s Guide
Standard CMOS Setup Page
This page displays a table of items defining basic information
about your system.
CMOS SETUP UTILITY – Copyright (C) 1985-2003, American Megatrends, Inc.
Standard CMOS Setup
Date & Time
These items set up system date and time.
IDE Pri Master/Pri Slave/Sec Master/Sec Slave
Use these items to configure devices connected to the Primary
and Secondary IDE channels. To configure an IDE hard disk
drive, choose Auto. If the Auto setting fails to find a hard disk
drive, set it to User, and then fill in the hard disk characteristics
(Size, Cyls, etc.) manually. If you have a CD-ROM drive,
select the setting CDROM. If you have an ATAPI device with
removable media (e.g. a ZIP drive or an LS-120), select
Floptical.
S-ATA0/1 Master
These items configure devices connected to the Serial ATA
channels. To configure a S-ATA hard disk drive, choose Auto.
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help F9: Optimized Defaults
System Time 00:01:25
System Date Thu 05/06/2004
Primary IDE Master Hard Disk
Primary IDE Slave Not Detected
Secondary IDE Master Not Detected
Secondary IDE Slave ATAPI CDROM
S-ATA0 Master Not Decteted
S-ATA1 Master Not Detected
Floppy A 1.44 MB 3 1/2”
Floppy B Disabled
Help Item
User [Enter], [TAB] or
[SHIFT-TAB] to select a
field.
Use [+] or [-] to configure
system time.