User`s guide

Chapter 3: BIOS Setup Utility

Keyboard Power On

If you enable this item, system can automatically resume by

pressing any keys, hot or power key on the keyboard or typing in

the password. You must use an ATX power supply in order to use

this feature.

Primary Graphics Adapter

This item indicates if the primary graphics adapter uses the PCI

or the AGP bus. The default AGP setting still lets the onboard

display work and allows the use of a second display card

installed in an PCI slot.

Allocate IRQ to PCI VGA

If this item is enabled, an IRQ will be assigned to the PCI VGA

graphics system. You set this value to No to free up an IRQ.

PCI IDE BusMaster

This item enables or disables the DMA under DOS mode. We

recommend you to leave this item at the default value.

PCI / Plug and Play Setup Page

This page sets up some parameters for devices installed on the

PCI bus and those utilizing the system plug and play capability.

PCI / Plug and Play Setup

Primary Graphics Adapter AGP

Allocate IRQ to PCI VGA Yes

PCI IDE BusMaster Disabled

Help Item

Select which

graphics control-

ler to use as the

primary boot

device.

: Move Enter: Select +/-/: Value F10: Save Esc: Exit

F1: General Help F9: Optimized Defaults