TU2-400 USB 2.
REGULATORY STATEMENTS FCC Certification Part15, Class B The United States Federal Communication Commission (FCC) and the Canadian Department of Communications have established certain rules governing the use of electronic equipment. FCC Part 15 Registration This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interface, and 2.
PRECAUTIONS 1. The USB 2.0 cable that came with this device is a High Speed Cable. In case that a different length of cable is required, make sure the replacement complies with the USB specification version 2.0 to avoid malfunction. 2. The device drivers that drive this device are provided by your operating system. For optimal performance, it is recommended that you keep up with the latest release of the operating system from your OS provider. 3. Use the Power Adapter provided with this device (DC 5V 2.4A).
INTRODUCTIONS Welcome to the Universal Serial Bus (USB) HUB, an easy plug and play external simple device that allowed your computer to connect to USB Interfaced monitors, printers, digital speakers, modems, digital cameras, joysticks or multimedia equipment. About this USB Hub The USB 2.0 HUB is a 4-port device used to bridge the USB interfaced peripherals to your desktop computers or notebook computers by providing one upstream connector and four downstream ports.
All Downstream ports support full-speed (12Mbps) and low-speed (1.
INSTALLATION Installation of the USB Hub is easy. SelfPowered mode is available for you to install the USB Hub. Each downstream port is 500mA (max) supplied. This power is sufficient enough to support most of the USB devices. 1. Plug the DC end of the power adapter into the DC jack of the Hub. 2. Plug the AC end of the power adapter into an electronic outlet. 3. Plug the B-type plug of USB 2.0 cable into the “upstream port” of the Hub. 4. Plug the A-type plug of USB 2.0 cable into the PC site.
5. Connect USB devices to "downstream port " (1-4 port) of the Hub.
SPECIFICATIONS Ports: 4 downstream ports with USB type A receptacles 1 upstream port with USB type B receptacle LED Indicators: Self-powered: Glows amber when PC is powered on and Power adapter is ready High speed: Glows green when upstream port is linked to USB 2.0 Interface Port Status: Port1 - Port4 glows green when it is active Physical Specification: Dimension: 80 x 58.36 x 26.
Each downstream port of DC +5V, 500mA (Max.