SDS

130521-38 - PC CONCRETE EPOXY, PART B
Revision Date: 13-Mar-2014
_____________________________________________________________________________________________
_____________________________________________________________________________________________
Page 4 / 9
Conditions for safe storage, including any incompatibilities
Storage Conditions
Keep containers tightly closed in a dry, cool and well-ventilated place. Store locked up.
Incompatible Materials
Strong acids, peroxides, and other oxidizing agents.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure Guidelines
Chemical Name
ACGIH TLV
OSHA PEL
NIOSH IDLH
Silica, Quartz
14808-60-7
TWA: 0.025 mg/m
3
respirable
fraction
(vacated) TWA: 0.1 mg/m
3
respirable dust
: (30)/(%SiO2 + 2) mg/m
3
TWA
total dust
: (250)/(%SiO2 + 5) mppcf
TWA respirable fraction
: (10)/(%SiO2 + 2) mg/m
3
TWA
respirable fraction
IDLH: 50 mg/m
3
respirable dust
TWA: 0.05 mg/m
3
respirable
dust
Ethylene glycol
107-21-1
Ceiling: 100 mg/m
3
aerosol only
(vacated) Ceiling: 50 ppm
(vacated) Ceiling: 125 mg/m
3
-
Other Information
If product is sanded, appropriate respirator should be worn to avoid breathing dust.
Pre-existing respiratory disorders may be aggravated by exposure. If sanded, this material
may generate silica / titanium dust. Inhaled silica / titanium has been classified by IARC as
a human carcinogen (see section 11).
Appropriate engineering controls
Engineering Controls
Provide general or local exhaust ventilation if product is sanded or ground.
Individual protection measures, such as personal protective equipment
Eye/Face Protection
Wear protective eyeglasses or chemical safety goggles.
Skin and Body Protection
Wear protective gloves and protective clothing.
Respiratory Protection
Ensure adequate ventilation, especially in confined areas. If engineering controls do not
maintain airborne concentrations below recommended exposure limits, a NIOSH/MSHA
approved respirator must be worn.
General Hygiene Considerations
Handle in accordance with good industrial hygiene and safety practice. After use, wash
hands and exposed skin with soap and water. Do not eat, drink or smoke while handling
product. Wash contaminated clothing before reuse.
9. PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
Physical State
Paste
Appearance
Black paste
Odor
Slight amine
Color
Black
Odor Threshold
Not determined
Property
Values
Remarks • Method
pH
Not determined
Melting Point/Freezing Point
Non disponible
Boiling Point/Boiling Range
Not determined
Flash Point
> 93 °C / > 200 °F
Evaporation Rate
Not determined
Flammability (Solid, Gas)
Not determined