Safety Data Sheet Issue Date: 07-Nov-2018 Revision Date: 12-Nov-2018 Version 1 1. IDENTIFICATION Product identifier Product Name PC-Concrete PRO Part A Other means of identification SDS # 181107-58 UN/ID No UN3267 Recommended use of the chemical and restrictions on use Recommended Use Anchoring Epoxy. Details of the supplier of the safety data sheet Supplier Address Protective Coatings Co. 221 S Third St.
Revision Date: 12-Nov-2018 181107-58 - PC-Concrete PRO Part A _____________________________________________________________________________________________ Precautionary Statements - Prevention Obtain special instructions before use Do not handle until all safety precautions have been read and understood Use personal protective equipment as required Do not breathe dust/fume/gas/mist/vapors/spray Wash face, hands and any exposed skin thoroughly after handling Contaminated work clothing must not be allowed
Revision Date: 12-Nov-2018 181107-58 - PC-Concrete PRO Part A _____________________________________________________________________________________________ Inhalation Remove exposed individual(s) to fresh air for 20 minutes. Consult a physician/poison center if individual's condition declines or if symptoms persist. Ingestion Clean mouth with water and drink afterwards plenty of water. Never give anything by mouth to an unconscious person. Do NOT induce vomiting. Seek medical advice.
Revision Date: 12-Nov-2018 181107-58 - PC-Concrete PRO Part A _____________________________________________________________________________________________ Conditions for safe storage, including any incompatibilities Storage Conditions Keep containers tightly closed in a dry, cool and well-ventilated place. Store locked up. Incompatible Materials Strong oxidizing agents. Strong acids. 8.
Revision Date: 12-Nov-2018 181107-58 - PC-Concrete PRO Part A _____________________________________________________________________________________________ Dynamic Viscosity Explosive Properties Oxidizing Properties Not determined Not determined Not determined 10. STABILITY AND REACTIVITY Reactivity Not reactive under normal conditions. Chemical stability Stable under recommended storage conditions. Possibility of hazardous reactions None under normal processing.
Revision Date: 12-Nov-2018 181107-58 - PC-Concrete PRO Part A _____________________________________________________________________________________________ Numerical measures of toxicity The following values are calculated based on chapter 3.1 of the GHS document No values to calculate. 12. ECOLOGICAL INFORMATION Ecotoxicity An environmental hazard cannot be excluded in the event of unprofessional handling or disposal.
Revision Date: 12-Nov-2018 181107-58 - PC-Concrete PRO Part A _____________________________________________________________________________________________ 15.
Revision Date: 12-Nov-2018 181107-58 - PC-Concrete PRO Part A _____________________________________________________________________________________________ 16.
Safety Data Sheet Issue Date: 07-Nov-2018 Revision Date: 12-Nov-2018 Version 1 1. IDENTIFICATION Product identifier Product Name PC-Concrete PRO Part B Other means of identification SDS # 181107-57 UN/ID No UN2735 Recommended use of the chemical and restrictions on use Recommended Use Anchoring Epoxy. Details of the supplier of the safety data sheet Supplier Address Protective Coatings Co. 221 S Third St.
Revision Date: 12-Nov-2018 181107-57 - PC-Concrete PRO Part B _____________________________________________________________________________________________ Precautionary Statements - Prevention Obtain special instructions before use Do not handle until all safety precautions have been read and understood Use personal protective equipment as required Do not breathe dust/fume/gas/mist/vapors/spray Wash face, hands and any exposed skin thoroughly after handling Contaminated work clothing must not be allowed
Revision Date: 12-Nov-2018 181107-57 - PC-Concrete PRO Part B _____________________________________________________________________________________________ Skin Contact Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes. Remove and wash contaminated clothing before reuse. If skin irritation or rash occurs: Get medical advice/attention. Inhalation Remove exposed individual(s) to fresh air for 20 minutes.
Revision Date: 12-Nov-2018 181107-57 - PC-Concrete PRO Part B _____________________________________________________________________________________________ 7. HANDLING AND STORAGE Precautions for safe handling Advice on Safe Handling Handle in accordance with good industrial hygiene and safety practice. Wear appropriate personal protective equipment. Do not eat, drink or smoke when using this product. Wash face, hands and any exposed skin thoroughly after handling.
Revision Date: 12-Nov-2018 181107-57 - PC-Concrete PRO Part B _____________________________________________________________________________________________ 9.
Revision Date: 12-Nov-2018 181107-57 - PC-Concrete PRO Part B _____________________________________________________________________________________________ 11. TOXICOLOGICAL INFORMATION Information on likely routes of exposure Product Information Eye Contact Causes severe eye damage. Skin Contact Causes severe skin burns. May cause an allergic skin reaction. Inhalation May cause irritation if inhaled. Ingestion Ingestion may cause irritation to mucous membranes. May be harmful if swallowed.
Revision Date: 12-Nov-2018 181107-57 - PC-Concrete PRO Part B _____________________________________________________________________________________________ 12. ECOLOGICAL INFORMATION Ecotoxicity Harmful to aquatic life with long lasting effects.
Revision Date: 12-Nov-2018 181107-57 - PC-Concrete PRO Part B _____________________________________________________________________________________________ IMDG UN number Proper Shipping Name Transport hazard class(es) Packing Group UN2735 Amines, liquid, corrosive, n.o.s. (1,3-Cyclohexanedimethanamine, 2-Piperazin-1-Ylethylamine) 8 III 15.
Revision Date: 12-Nov-2018 181107-57 - PC-Concrete PRO Part B _____________________________________________________________________________________________ Titanium dioxide 13463-67-7 X X X 16.