SDS
130519-12 - PC ROT TERMINATOR, RESIN
Revision Date: 08-Mar-2019
_____________________________________________________________________________________________
_____________________________________________________________________________________________
Page 3 / 8
Indication of any immediate medical attention and special treatment needed
Notes to Physician
Skin and eye conditions may be aggravated by long term exposure.
Medical Conditions Aggravated by Long-Term Exposure: skin disorders and allergies and
eye conditions.
5. FIRE-FIGHTING MEASURES
Suitable Extinguishing Media
Carbon dioxide (CO2), Dry chemical, Alcohol foam.
Unsuitable Extinguishing Media
Not determined.
Specific Hazards Arising from the Chemical
Ignition will give rise to a Class B fire. May generate toxic or irritating combustion products. May generate carbon monoxide gas.
Hazardous combustion products Carbon monoxide. Carbon dioxide (CO2),
Protective equipment and precautions for firefighters
Keep containers cool with water spray. Wear butyl rubber boots, gloves, and bodysuit. As in any fire, wear self-contained breathing
apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear. Do not release runoff from fire
control methods to sewers or waterways. NFPA Class IIIB.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Personal Precautions
Wear protective gloves/protective clothing and eye/face protection. Remove any
contaminated clothing and wash thoroughly before reuse.
For Emergency Responders
Follow applicable OSHA regulations (29 CFR 1910.120).
Environmental precautions
Environmental precautions
See Section 12 for additional Ecological Information.
Methods and material for containment and cleaning up
Methods for Containment
Prevent further leakage or spillage if safe to do so. For large spills, dike far ahead of liquid
spill for later disposal.
Methods for Clean-Up
Dispose of contents/container to an approved waste disposal plant. Soak up in adsorbent
material such as sand and collect in suitable containers. Residual resin may be removed
using steam or hot soapy water. For waste disposal, see section 13 of the SDS.
7. HANDLING AND STORAGE
Precautions for safe handling
Advice on Safe Handling
Handle in accordance with good industrial hygiene and safety practice. Use personal
protection recommended in Section 8. Avoid breathing vapors or mists. Do not eat, drink or
smoke when using this product. Wash face, hands and any exposed skin thoroughly after
handling. Contaminated work clothing must not be allowed out of the workplace.