User's Manual

the watch for at least 3 minutes, then it will alarm if the strap was taken
off, and terminal will send a alarm message to the center number (The
default setting is off), and send a alarm notification to the APP.
7.3 Low power alarm
If the power percentage is less than 20%, it will alarm, and terminal will
send a alarm message to the center number. At the same time it will
send a alarm notification to the APP.
7.4 Health
7.4.1 Smart pedometer
A vibration sensor mounted on the device, when the client are doing
healthy exercise, and reach a moving limit, smart pedometer application
program will begin. Client could know their movement through the APP.
7.4.2 Sleep Management
Based on the upturned frequency of the device, the device can determine
whether a reasonable night sleep of the client. The default detection time
for 10:00 p.m. to 7:00 a.m. of the following day. Data could be viewed on
the APP.
7.4.3 Physical activity
Calculating according to the steps, step and weight, and the interval and
weight can be set up
7.4.4 Sports journey
According to the result of step and step distance calculation, the interval can be
set up.
7.5 Talkback
Long press the button 2 to start recording,then release for send the message to the APP . When
you got voice message, the watch will show voice symbol, short press the button 4 play the
message, After you read all the message, the message will delete automatically. and the voice
symbol will disappear.
7.6 Remote monitoring
Firstly, you need set tutelar number, and send opening voice monitoring
instructions to device , then device will dial to the tutelar number, turn to auto
answer state. And for one-way conversation, device can't hear voice of the
other side.
7.7 Turn off
Remove SIM card then click turn off button ,APK remote control to power off.
7.8 The phone book
You can be set 10 phone numbers for the watch's phone book in APP, these Numbers can make
double talk with the watch. press button 3 enter the phone book, then press button 3 for choose
phone number, long press for dialing.
8.Trouble diagnoses
Device can't connect to server at the first time and the backend show off
line. Please check below:
1) Check if you have put the SIM card correct, and the screen display is
normal, please refer to the picture instruction.