User's Manual

-6-
Install Your MBC6890
To use your MBC6890, please follow the instruction step by step as below:
1. Charge battery for at least 4 hours for the first time.
n Connect the power to Smart Cradle.
n Load battery pack into the battery charging well for at least 4 hours. (for the first time only)
2. Install Smart Cradle
n Power off Host computer.
n Connect the power to Smart Cradle.
n Connect desired interface cable between Smart Cradle and host computer.
n Power on Host computer.
n Make sure the COM port is not occupied by other host application if RS232 Serial cable is used.
3. Install Scanner
n Place battery pack into scanner and close battery cover.
n Add connection cap at the end of scanner holder.